-
Email
sales@tubotechalloys.com -
Phone
+91 9769961320 -
Address
Pathan Durgadevi Udyan, Ground Floor, 25 Plot No 74/80, Patra Chawl, Maruti , Mandir Marg, Second Street, Girgaon, Mumbai, Maharashtra 400004
Phone
+91 9769961320Address
Pathan Durgadevi Udyan, Ground Floor, 25 Plot No 74/80, Patra Chawl, Maruti , Mandir Marg, Second Street, Girgaon, Mumbai, Maharashtra 400004
The specifications of Male Branch Tees which are regularly used in hydraulic and industrial applications as per JIC (Joint Industry Council), BSP (British Standard Pipe), and NPT (National Pipe Thread) standards are given in the table below:
| Part No. | Tube OD (mm) | JIC Thread (UNF) | BSPT Thread | Length (L) mm | Hex (F) mm |
|---|---|---|---|---|---|
| FFF/MC/06M/04/02R | 6 | 7/16 – 20 | 1/8 | 31 | 14 |
| FFF/MC/08M/05x04R | 8 | 1/2 – 20 | 1/4 | 35.5 | 14.5 |
| FFF/MC/10M/06x06R | 10 | 9/16 – 18 | 3/8 | 36.5 | 14.5 |
| FFF/MC/12M/08x08R | 12 | 3/4 – 16 | 1/2 | 43.5 | 19 |
| FFF/MC/16M/10x12R | 16 | 7/8 – 14 | 3/4 | 48.5 | 19 |
| FFF/MC/25M/16x16R | 25 | 1 5/16 – 12 | 1 | 58.5 | 24 |
2. BSP Male to JIC Male Adaptor Specifications:
| Part No. | BSP Thread (G) | JIC Thread (UNF) | Length (L) mm | Hex (F) mm |
|---|---|---|---|---|
| 1BJ-04 | G1/4″ x 19 | 7/16″ x 20 | 32 | 19 |
| 1BJ-06 | G3/8″ x 19 | 9/16″ x 18 | 35.5 | 22 |
| 1BJ-08 | G1/2″ x 14 | 3/4″ x 16 | 43 | 27 |
| 1BJ-10 | G5/8″ x 14 | 7/8″ x 14 | 45 | 30 |
| 1BJ-12 | G3/4″ x 14 | 1 1/16″ x 12 | 48 | 32 |
Typically, Male Branch Tees are manufactured using high-quality Stainless Steel grades 304, 316, 316L, Brass, and Carbon Steel. So, their chemical content is given in the table below:
| Material | C (max) | Mn (max) | Si (max) | P (max) | S (max) | Cr (%) | Ni (%) | Mo (%) | Cu (%) | Fe (%) | Zn (%) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| SS 304 | 0.08 | 2.00 | 0.75 | 0.045 | 0.030 | 18.0 – 20.0 | 8.0 – 11.0 | — | — | Balance | — |
| SS 316 | 0.08 | 2.00 | 1.00 | 0.045 | 0.030 | 16.0 – 18.0 | 10.0 – 14.0 | 2.0 – 3.0 | — | Balance | — |
| SS 316L | 0.03 | 2.00 | 1.00 | 0.045 | 0.030 | 16.0 – 18.0 | 10.0 – 14.0 | 2.0 – 3.0 | — | Balance | — |
| Brass (CW614N / IS 319) | — | — | — | 0.05 max | 0.05 max | — | — | — | 57 – 63% | — | Balance |
| Carbon Steel (A105) | 0.35 max | 1.65 max | 0.35 max | 0.035 | 0.040 | — | — | — | — | Balance | — |
The mechanical properties of Male Branch Tees using ASTM A182 F316 – Forged Stainless Steel are given in the table below:
| Property | Value |
|---|---|
| Material | ASTM A182 F316 |
| Standard | ASME B16.11 |
| Type | Forged Fitting – Male Branch Tee |
| Tensile Strength | 515 MPa (min) |
| Yield Strength | 205 MPa (min) |
| Elongation (%) | 30% (min) |
| Hardness (Brinell) | 217 HB (max) |
| Operating Temperature | -29°C to 815°C (based on material) |
| Pressure Rating (Class) | 2000 / 3000 / 6000 / 9000 (varies) |
There are 5 types of Male Branch Tees and several subtypes. They are given below:
These fittings are crucial in ensuring smooth, dependable, and ordinary fluid and gas waft at some stage in various high-stakes programs.
It is depending on the quality set by thread standard (NPT, BSPT, BSPP, Metric, etc.) and manufacturer, that the sizes of Male Branch Tees are available. They are given in the table below:
| Tube OD (Inch / mm) | Male Thread Size (NPT/BSP/Metric) | Common Material Options | Typical Applications |
|---|---|---|---|
| 1/8″ (3 mm) | 1/8″ NPT / BSP / M10x1 | Brass, SS 316, Carbon Steel | Pneumatics, lab systems |
| 1/4″ (6 mm) | 1/4″ NPT / BSP / M12x1.5 | Brass, SS 316, Carbon Steel | Pneumatics, hydraulics |
| 3/8″ (10 mm) | 3/8″ NPT / BSP / M14x1.5 | Brass, SS 304, Carbon Steel | General plumbing, air systems |
| 1/2″ (12 mm) | 1/2″ NPT / BSP / M18x1.5 | SS 316, Carbon Steel, Brass | Oil and gas, water lines |
| 5/8″ (16 mm) | 5/8″ UNF / BSP / M20x1.5 | SS 316, Brass | Hydraulic and fuel systems |
| 3/4″ (18 mm) | 3/4″ NPT / BSP / M22x1.5 | Stainless Steel, Brass | Industrial fluid transfer |
| 1″ (25 mm) | 1″ NPT / BSP / M27x2 | SS 316, Carbon Steel | Heavy-duty hydraulic systems |
| 1-1/4″ (32 mm) | 1-1/4″ NPT / BSP / M33x2 | Stainless Steel, Brass | Water treatment, process lines |
| 1-1/2″ (38 mm) | 1-1/2″ NPT / BSP / M42x2 | Stainless Steel | High-flow fluid lines |
| 2″ (50 mm) | 2″ NPT / BSP / M48x2 | SS 316, Carbon Steel | Industrial and oilfield use |
Typically, it is based on common sizes and materials mainly Stainless Steel 316 or Carbon Steel that there are different weights given below in the table:
| Tube OD | Male Thread Size | Material | Approx. Weight (g) |
|---|---|---|---|
| 1/8″ (3 mm) | 1/8″ NPT | SS 316 / CS | 40 – 60 g |
| 1/4″ (6 mm) | 1/4″ NPT | SS 316 / CS | 70 – 100 g |
| 3/8″ (10 mm) | 3/8″ NPT | SS 316 / CS | 110 – 150 g |
| 1/2″ (12 mm) | 1/2″ NPT | SS 316 / CS | 160 – 220 g |
| 5/8″ (16 mm) | 5/8″ UNF / BSP | SS 316 / CS | 250 – 300 g |
| 3/4″ (18 mm) | 3/4″ NPT | SS 316 / CS | 320 – 400 g |
| 1″ (25 mm) | 1″ NPT | SS 316 / CS | 500 – 650 g |
| 1-1/4″ (32 mm) | 1-1/4″ NPT | SS 316 / CS | 800 – 1000 g |
| 1-1/2″ (38 mm) | 1-1/2″ NPT | SS 316 / CS | 1100 – 1400 g |
| 2″ (50 mm) | 2″ NPT | SS 316 / CS | 1800 – 2200 g |
It is because of the versatility, strength, and compatibility that Male Branch Tees are used in a wide range of industries given below. They are as follows:
There are several reasons why you need to choose Tubotech, a top pipe and tube manufacturer in India for Male Branch Tees. They are as given below:
If you're seeking dependable, high-performance equivalent tees for your next project, look no further than Tubotech. As a fine Male Branch Tees Vendor and Male Branch Tees Exporter, we are ready to copy your operations with world-class fittings and unmatched customer service
Tubotech delivers precision-engineered tubing, fittings, and fasteners with innovative solutions and customizable options. Trusted for quality and durability, we serve industries requiring reliable, high-performance piping and instrumentation products.