-
Email
sales@tubotechalloys.com -
Phone
+91 9769961320 -
Address
Pathan Durgadevi Udyan, Ground Floor, 25 Plot No 74/80, Patra Chawl, Maruti , Mandir Marg, Second Street, Girgaon, Mumbai, Maharashtra 400004
Phone
+91 9769961320Address
Pathan Durgadevi Udyan, Ground Floor, 25 Plot No 74/80, Patra Chawl, Maruti , Mandir Marg, Second Street, Girgaon, Mumbai, Maharashtra 400004
Typically, all the specification details about Male Adaptors customised as per specific standards like BSP, NPT, or metric threads, and materials such as Stainless Steel (e.g., SS 310, 316), Brass, or Carbon Steel are given below:
| Parameter | Specification |
|---|---|
| Product Type | Male Adaptor |
| Thread Type | BSPT / NPT / BSPP / Metric / UNF |
| Connection Type | Male Thread × Tube / Pipe End |
| Material | SS 310, SS 316, SS 304, Brass, Carbon Steel, etc. |
| Size Range | 1/8” to 2” (or 6mm to 50mm OD) |
| Thread Size | 1/8” to 2” (custom options available) |
| Pressure Rating | Up to 6000 PSI (varies by size & material) |
| Temperature Range | -50°C to 600°C (depending on material) |
| Surface Finish | Pickled, Passivated, Electro-polished, or as required |
| Standards Complied | ASTM, ASME, DIN, ISO, SAE, ANSI |
| Applications | Hydraulic Systems, Petrochemicals, Marine, Power Plants |
The chemical composition of Male Adaptors will depend on the ‘Stainless Steel’ grading which are given in the table below:
| Element | SS 304 (%) | SS 316 (%) | SS 310 (%) | SS 316Ti (%) |
|---|---|---|---|---|
| Carbon (C) | ≤ 0.08 | ≤ 0.08 | ≤ 0.25 | ≤ 0.08 |
| Manganese (Mn) | ≤ 2.00 | ≤ 2.00 | ≤ 2.00 | ≤ 2.00 |
| Silicon (Si) | ≤ 1.00 | ≤ 1.00 | ≤ 1.50 | ≤ 0.75 |
| Phosphorus (P) | ≤ 0.045 | ≤ 0.045 | ≤ 0.045 | ≤ 0.045 |
| Sulfur (S) | ≤ 0.030 | ≤ 0.030 | ≤ 0.030 | ≤ 0.030 |
| Chromium (Cr) | 18.0 – 20.0 | 16.0 – 18.0 | 24.0 – 26.0 | 16.5 – 18.5 |
| Nickel (Ni) | 8.0 – 10.5 | 10.0 – 14.0 | 19.0 – 22.0 | 10.5 – 13.5 |
| Molybdenum (Mo) | — | 2.0 – 3.0 | — | 2.0 – 2.5 |
| Titanium (Ti) | — | — | — | ≥ 5×C (min) |
| Iron (Fe) | Balance | Balance | Balance | Balance |
The mechanical properties of Male Adaptors manufactured using stainless steel grades such as SS 304, SS 316, and SS 310.are given in the table below:
| Property | SS 304 | SS 316 | SS 310 |
|---|---|---|---|
| Tensile Strength | ≥ 515 MPa | ≥ 515 MPa | ≥ 520 MPa |
| Yield Strength (0.2%) | ≥ 205 MPa | ≥ 205 MPa | ≥ 205 MPa |
| Elongation | ≥ 40% | ≥ 40% | ≥ 40% |
| Hardness (HRB) | ≤ 95 | ≤ 95 | ≤ 95 |
| Impact Strength | Good (Room Temp) | Excellent (Cryogenic) | Moderate to Good |
| Modulus of Elasticity | ~193 GPa | ~193 GPa | ~200 GPa |
| Density | 7.9 g/cm³ | 7.98 g/cm³ | 7.90 g/cm³ |
| Melting Point | ~1400 – 1450 °C | ~1375 – 1400 °C | ~1390 – 1440 °C |
| Temperature Resistance | Up to 870 °C (intermittent) | Up to 870 °C (intermittent) | Up to 1100 °C (continuous) |
There are three types and few sub-types of Male Adaptors. They are given below:
These fittings are crucial in ensuring smooth, dependable, and ordinary fluid and gas waft at some stage in various high-stakes programs.
The standard sizes of Male Adaptors are based on common thread sizes and corresponding tube or pipe outer diameters (OD). They are given in a table below:
| Thread Size (BSP/NPT) | Tube OD (mm) | Tube OD (inch) | Typical Hex Size (mm) | Length (mm) |
|---|---|---|---|---|
| 1/8″ | 6 | 1/4″ | 14 – 16 | 25 – 30 |
| 1/4″ | 8 | 5/16″ | 17 – 19 | 30 – 35 |
| 3/8″ | 10 | 3/8″ | 19 – 22 | 35 – 40 |
| 1/2″ | 12 – 15 | 1/2″ | 22 – 27 | 40 – 45 |
| 3/4″ | 18 – 20 | 3/4″ | 30 – 32 | 45 – 50 |
| 1″ | 25 | 1″ | 36 – 41 | 50 – 60 |
| 1 1/4″ | 32 | 1 1/4″ | 46 – 50 | 60 – 65 |
| 1 1/2″ | 38 | 1 1/2″ | 50 – 55 | 65 – 70 |
| 2″ | 50 | 2″ | 60 – 65 | 70 – 80 |
The weight of Male Adaptors is usually based on thread size, material, and standard wall thickness. The details are given in a tabular form given below:
| Thread Size (BSP/NPT) | Tube OD (mm) | Material | Approx. Weight (grams) |
|---|---|---|---|
| 1/8″ | 6 | SS 304/316 | 40 – 60 g |
| 1/4″ | 8 | SS 304/316 | 60 – 80 g |
| 3/8″ | 10 | SS 304/316 | 90 – 120 g |
| 1/2″ | 12 – 15 | SS 304/316 | 120 – 180 g |
| 3/4″ | 18 – 20 | SS 304/316 | 200 – 280 g |
| 1″ | 25 | SS 304/316 | 300 – 400 g |
| 1 1/4″ | 32 | SS 304/316 | 450 – 600 g |
| 1 1/2″ | 38 | SS 304/316 | 600 – 750 g |
| 2″ | 50 | SS 304/316 | 900 – 1200 g |
Usually, Male Adaptors play a major role in many industries. They are given below:
There are several reasons why you need to choose Tubotech a top pipe and tube manufacturer in India for male adaptors:
If you're seeking dependable, high-performance equivalent Male Adaptors for your next project, look no further than Tubotech. As a fine Male Adaptors Vendor and Male Adaptors Exporter, we are ready to copy your operations with world-class fittings and unmatched customer service
Tubotech delivers precision-engineered tubing, fittings, and fasteners with innovative solutions and customizable options. Trusted for quality and durability, we serve industries requiring reliable, high-performance piping and instrumentation products.